Yabby Edge Cellular

Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands.

Supported LTE bands: LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B18, B19, B20, B25, B26, B28, B66

NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66 

Internal Micro 3FF SIM

Operating: -20°C to +54°C
Recommended Storage: 10°C to 30°C, Humidity 30%. Store in a cool, dry place.

Internal. Supports optional external antenna for maximum range.

Internal.

3-Axis Accelerometer to detect tampering (planned in future firmware release).

Diagnostic LEDs indicate operation status.

Store months of records if device is out of cellular coverage. View storage capacity here.

The device reports internal temperature which provides an indication of ambient temperature but may not always be precise. Use an external sensor for precise temperature monitoring.

Nordic nRF9160 internal GPS

GPS

~3m CEP

* Positioning accuracy specifications are provided by the GNSS module supplier and reflect ideal conditions. Device configuration, installation, environmental conditions, augmentation services, and many other factors may lead to variations in positioning accuracy. 

GPS predicted ephemeris data for greater sensitivity and position accuracy.

GPS signals are boosted by a low-noise amplifier (LNA) allowing operation in low signal.

1 x Digital input with configurable pull up/pull down
0-40V DC input range
On/Off thresholds: ON > 2V, Off < 1V
Can be used for pulse counting (max 40MHz)

The versatile and flexible Hawk architecture caters for plug-in cards that define the 9 inputs/outputs, offering limitless options for interfacing to sensors. Flexible onboard output power to power your sensors. See the current card list below or contact us to discuss your requirements.

 ‘Battery Low’ and ‘Battery Critical’ alert levels.

Powerful onboard task management allows you to schedule tasks or run tasks based on sensor thresholds and events, even when out of cellular coverage.

2 x D Cell Alkaline (1.5V per cell). Batteries not included.

Alkaline

Battery selection is very important. Follow this link to learn more.

185 x 150 x 30 mm (7.3 x 5.9 x 1.2 in)

Non-branded nylon glass housing is suitable for white labeling.

Ultra-rugged and waterproof IP68 and IK07-rated housing to ensure the device can withstand impact, fine dust, and brief submersion.

Allows for pressure equalization while protecting against water and dust ingress.

Multiple installation options for securing the device with screws, bolts, cable ties, rivets, and more. 
Includes 2 cable glands to allow for waterproof cable entry to the housing.

Remotely configure sensor sampling rates, position updates, upload intervals, and more.

Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system.

Configurable with DM-Link provisioning tool.

TCP Direct or HTTPS Webhook.

Military-level AES-256 Encryption from device to Device Manager to protect the integrity and 
confidentiality of your data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

Two-year manufacturer’s warranty. Exclusions apply.

Please check our knowledge base for regulatory and network certifications.

Certifications are not valid if using the Hawk without a Digital Matter housing or with an external antenna.