Bolt2

Nordic nRF9160 operates on all major global LTE-M and NB-IoT bands.

Supported LTE bands:

LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B18, B19, B20, B25, B26, B28, B66

NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66 

 Internal Nano 4FF SIM 

u-blox M10 

Concurrent GPS, GLONASS, BeiDou, Galileo 

 GNSS almanac and ephemeris data for greater sensitivity and position accuracy. 

 GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail. 

~2m CEP
 

* Positioning accuracy specifications are provided by the module supplier and reflect ideal conditions. Device configuration, installation, environmental conditions, augmentation services, and many other factors may lead to variations in positioning accuracy. 

8-33V DC (max).
OBDII connector draws power from vehicle’s OBD port. 

Built-in self-resetting fuse makes installation simple and safe. Stringent automotive power “load dump” tests are conducted to ensure operation in the harshest electrical systems. 

 <1mA 

300mAh LiPo internal backup battery pack. 

 71 x 46 x 24 mm (2.8 x 1.81 x 0.94 in) 

Non-branded nylon glass housing is suitable for white labeling. 

OBDII standard connector draws power from the OBDII port to operate. 

Operating: -30°C to +60°C
Recommended Storage: 10°C to 30°C, Humidity 30%.
Store in a cool, dry place. 

 Internal

 Internal

 3-Axis accelerometer to detect movement, high-g events, and more. 

 Diagnostic LED indicates operation status. 

Store records if device is out of cellular coverage. View storage capacity here. 

The device continuously monitors speed and heading, allowing for over-speed alerts as well as updates on speed and heading changes. 

The device reports internal temperature and prevents the internal battery from charging in extreme temperatures. May not be suitable for precise temperature logging purposes. 

Configure accident and rollover alerts, triggered by extreme changes in the velocity and orientation of the vehicle or equipment. Up to 2 hours of second-by-second ‘black box’ data is stored to provide critical accident reconstruction data. 

Monitor speeding, harsh acceleration, braking, cornering, idle times and more to improve safety and prevent unnecessary wear on vehicles. 

The server can use device location to create geofences and alerts if an asset enters or leaves designated locations. 

GPS jamming or interference can be detected and alerted on. 

Set reminders based on distance traveled and run hours to reduce maintenance and repair costs. 

Device remains continuously connected while on the move for real-time asset tracking. 

Calculate run hours and distance travelled (odometer) to understand and optimize asset utilization. 

Critical ‘unplugged/power loss’ alerts to notify users of device removal, tampering, unauthorized trips, or theft. 

Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval. 

 Configure device parameters such as position update rate, movement and accelerometer settings, and more. 

Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system. 

Configurable with DM-Link provisioning tool. 

TCP Direct or HTTPS Webhook

Command and configure the device via rich API functionality. 

Military-grade AES-256 Encryption from device to Device Manager to protect the integrity and confidentiality of your data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security. 

Two-year manufacturer’s warranty. Exclusions apply. 

Please view our knowledge base for regulatory and network certifications.